Dear gurus,

We are upgrading from ECC 6.0 EHP4 SP12 to ECC 6.0 EHP6 SP8 and phase ACT_UPG has failed with RC12. When we check the dump it shows the following error:

Runtime error: DBIF_REPO_SQL_ERROR

Shorttext:  SQL error "-99999" occurred when accessing program

Database error text........: "CLI0106E Connection is closed. SQLSTATE=08003"

Triggering SQL statement...: "CX_SY_OPEN_SQL_DB=============CP "

Internal call code.........: "[REPO/*/43/LOAD/CX_SY_OPEN_SQL_DB=============CP

]"

Any help would be appreciated

Thanks

Diana

in between of upgrade got the below error

2WETP000 13:15:21: Retcode 1: error in DDL statement for "GVD_SPPARAMETER               " - repeat

2EETP345 13:15:33: Retcode 1: SQL-error "2220-ORA-02220: invalid MINEXTENTS storage option value" i

2EETP345 n DDL statement for "GVD_SPPARAMETER               "

2 ETP399  --------------- DB-ROLLBACK() ---------------

2EETP334 13:15:33: error in DDL, nametab for "GVD_SPPARAMETER" not activated

2 ETP301 ----------------------------------------------------------------------

3 ETP361 "0" Shadow-Nametabs activated, DDL executed

2 ETP362 "1" Shadow-Nametab activations failed

2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2012/12/20 13:15:21")

2 ETP363 End  : Act. of Shadow-Nametabs with DDL ("2012/12/20 13:15:33")

2 ETP301 ----------------------------------------------------------------------

1 ETP180 UNKNOWN ACTION

1 ETP110 end date and time   : "20121220131533"

1 ETP111 exit code           : "8"

1 ETP199 ######################################

Hello Guys,

I am facing issue in Preprocessing phase as per the attached screenshot.

***LOG BBC=>nametab inconsistency for table TADIR~     regarding view buffering

For this error.. I have changed the index from unique to non-unique and activated and adjusted the table COMC_ATTRIBUTE.

Still I am facing the same issue.

Kindly help .

BR,

Madhura

Hello,

During the installation of Addon Smart Financials 1.0 on Hana via SUM the following error occured in Phase

MAIN_TRANSEXEC/STARTSAP_TRXPRA

Error in SUM:

Checks after phase MAIN_TRANSEXEC/STARTSAP_TRXPRA were negative!

Last error code set: Unknown macro 'FN_WORKPRC'<br/> System start failed

SAPup.log

CURRENTPHASE MAIN_TRANSEXEC/STARTSAP_TRXPRA

...started at 20140516060916

# Phase error status set: NO SYSTEM START

..timestimes self: 0.040/0.010 usr/sys, children 0.000/0.000 usr/sys.

..finished at 20140516060917 with status FAILED.

# Error message set: 'Unknown macro 'FN_WORKPRC'

System start failed'

...begin dialog at 20140516060917

System is up and running.

Thanks

Steven

Hello Team,

Got hanged at the phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative,.

Error:

Checks after phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE were negative!

Last error code set: Detected 1 aborted activities in 'PHASES.ELG'<br/> Calling 'D:\usr\sap\XXX\DVEBMGS00\exe/tp' failed with return code 13, check D:\Software\SUM\abap\log\SAPup.ECO for details

Log file says:

EXECUTING D:\usr\sap\XXX\DVEBMGS00\exe\tp.EXE "pf=D:\Software\SUM\abap\var\DEFAULT.TPP" import all XXX

This is D:\usr\sap\XXX\DVEBMGS00\exe\tp.EXE version 380.03.95 (release 738, unicode enabled)

Could not open the ICU common library.

The following files must be in the path described by

the environment variable "PATH":

icuuc50.dll, icudt50.dll, icuin50.dll [D:/depot/bas/741_REL/src/flat/nlsui0.c 1535] pid = 12148

PATH is currently set to D:\usr\sap\XXX\DVEBMGS00\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\j2sdk1.4.2_24-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\XXX\SYS\exe\uc\NTAMD64  [D:/depot/bas/741_REL/src/flat/nlsui0.c 1538] pid = 12148

stopping on error 13 during MAIN IMPORT

tp returncode summary:

TOOLS: Highest return code of single steps was: 13

WARNS: Highest tp internal warning was: 0118

tp finished with return code: 13

meaning:A tool used by tp got a signal from operating system

tp=>sapparam(1c): No Profile used.

tp=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

ERROR: stopping on error 13 during MAIN IMPORT

SAPup> Process with PID 12212 terminated with status 13 at 20140515155156!

### Phase PREP_IMPORT/TOOLIMP_TOOLDEL_PRE:

Please help me out,..

Thank you,

Mohan Karamala.

ERP 5.0 to ERP 6.0 upgrade: What activities can advance in the upgrade project, for missing three months for the server. ?

Thanks

HI All,

I am trying to do SPS stack update using SUM (Software Update Manager) tool. While running the SUM I am getting below error in Select Target Phase..

SUM version using is

Software Update Manager Version: 1.0

Support Package Version: 10

Patch Level: 5

Please help me on this.

        An error has occurred during the execution of the Read AS ABAP profiles parameters step  .

Error while executing Task with input file ReadBaseCommonProfilesABAP.xml and task READ_BASE_COMMON_PROFILES_ABAP. Could not determine profile parameters. Error while retrieving value SAPDBHOST,SAPSYSTEMNAME,rdisp/mshost, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key SAPDBHOST,SAPSYSTEMNAME,rdisp/mshost, from file D:/usr/sap/ID6/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process d:\usr\sap\ID6\DVEBMGS00\exe\sappfpar. Error while executing process d:\usr\sap\ID6\DVEBMGS00\exe\sappfpar. java.io.IOException: CreateProcess error=193, %1 is not a valid Win32 application java.io.IOException: CreateProcess error=193, %1 is not a valid Win32 application

        You can find more information in the files D:\usr\sap\trans\SUM\sdt\log\SUM\READ-BASE-ABAP-PROFILES_01.LOG and ProcessOverview.html.            To troubleshoot the problem use the provided information. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following keywords:  

DETECT  define_target  define-target-source  read-base-abap-profiles  com.sap.sdt.j2ee.services.servicesimpl.EngineProfileService  class com.sap.sdt.util.diag.DiagException

I am attaching the log file READ-BASE-ABAP-PROFILES_01.LOG.

Thanks,

Krishna.

HI All,

I am trying to do SPS stack update using SUM (Software Update Manager) tool. While running the SUM I am getting below error in Select Target Phase..

SUM version using is

Software Update Manager Version: 1.0

Support Package Version: 10

Patch Level: 5 

Please help me on this.

        An error has occurred during the execution of the Read AS ABAP profiles parameters step  .

Error while executing Task with input file ReadBaseCommonProfilesABAP.xml and task READ_BASE_COMMON_PROFILES_ABAP. Could not determine profile parameters. Error while retrieving value SAPDBHOST,SAPSYSTEMNAME,rdisp/mshost, with retriever com.sap.sdt.tools.sysinfo.ProfileDataRetriever. Could not extract value with key SAPDBHOST,SAPSYSTEMNAME,rdisp/mshost, from file D:/usr/sap/ID6/SYS/profile/DEFAULT.PFL. A possible reason could be that the path to the directory containing the sappfpar executable is not included in the PATH environment variable. Could not start process d:\usr\sap\ID6\DVEBMGS00\exe\sappfpar. Error while executing process d:\usr\sap\ID6\DVEBMGS00\exe\sappfpar. java.io.IOException: CreateProcess error=193, %1 is not a valid Win32 application java.io.IOException: CreateProcess error=193, %1 is not a valid Win32 application

        You can find more information in the files D:\usr\sap\trans\SUM\sdt\log\SUM\READ-BASE-ABAP-PROFILES_01.LOG and ProcessOverview.html.             To troubleshoot the problem use the provided information. An SAP Note may provide a solution to this problem. Search for SAP Notes with the following keywords:    

DETECT  define_target  define-target-source  read-base-abap-profiles  com.sap.sdt.j2ee.services.servicesimpl.EngineProfileService  class com.sap.sdt.util.diag.DiagException

I am attaching the log file READ-BASE-ABAP-PROFILES_01.LOG.

Thanks,

Krishna.

Dear Experts,

Recently we got an error  " ADS:SOAP Runtime Execption: Csoap Exception Transport:(100101) " in our landscape systems while we are processing some forms in sap.

I don,t Know the configuration details how it is configured earlier and from which system it can solve this error. I have followed the document 944221 note about the ADS configuration guide. But the thing is I cant get that details through which system ADS is configured.

We have solution manager system. Earlier when same error occurred our previous basis consultant has rectified error by login to the solution manager system to resolve it.

I want to know what might caused the problem now again. One thing that our landscape systems has been completely effected after database refresh in Quality system. Is stms causes the error of ADS.

Please help me to solve the error.

Regards,

Harsha.

We areplanning anupgradefromBW7.0 toBW7.40,buttheERPiscurrentlyinversion 6.0withoutEHP, I searched notes relatedtoERPimpactand have notcaughtanything.

Plz any idea?

Best regards.
HD

Hi Experts

We are planning to upgrade our system from ECC6.0 -EHP4 to EHP6.

Source - ECC6.0-EHP4

Target - ECC6.0-EHP6(Enhancement pack6)

Current ECC version -

SAP_BASIS 701 0014 SAPKB70114 SAP Basis Component

SAP_APPL 604 0013 SAPKH60413 Logistics and Accounting

We would like to know during the project if we can do a transport

between upgraded development ECC6.0 -EHP6 to non upgrade production ECC6.0-EHP4.

We have data from note 1090842 and 1273566.

But last 10 lines of note 1090842 are contradictory wherein on one side it says you can do transports between Releases 7.0*, 7.3* and 7.4* and

on other it says it can be problem if support pack levels are different on same release.(if problem can happen on same release with different pack

level then there are greater chances of issues between different releases).Note 1273566 is clear and suggest no issues exist yet for

technical and logical transports between suggested version 700/701 to >=702

Also below is the extract from SUM guide - (SUM-1.0-SP07)

RECOMMENDATION

We strongly recommend that you perform transports only between systems of the same release or enhancement package level, and where the same business functions are activated. If you do not follow this recommendation, you do so at your own risk regarding potential problems.

Please suggest if we need to create Dual maintainance parallel landscape during the tenure of project where two development system co-exist.One

with current and one with upgraded version and changes need to be done on both in parallel.Support fixes and LTO’s go from non upgraded dev to non upgraded prod.

Thanks

Hi Friends,

I need some information about EHP7 installation IDES version on my own laptop.

1) What is the Hardware Configuration required for EHP7(OS, DB, SAP).

2) We are using Mssql 2008r2, Which Database is required more than this Mssql 2008R2.

3) Where i can get the Media of EHP 7, In Media what are the Files i need to Download For installing EHP 7 with Mssql.

Please provide any documents related this EHP7.

Thanks for your's support.

Hello,

i get Error when install SAP ERP 6.0 Support Release 3 in windows server 2003 and database oracle 10g.

kindly give solution for below errors.

ERROR

1)

CJS-00087  Mapping of tables/objects to tablespace information is missing. DIAGNOSIS: Could not find file C:\Documents and Settings\Administrator\Desktop\SAP\EXPORT\51037623_1/DB/ORA/DBSIZE.XML. SOLUTION: Specify the file in the installation output directory.

2)

MUT-03025  Caught ESAPinstException in Modulecall: C:\Documents and Settings\Administrator\Desktop\SAP\EXPORT\51037623_1/DB/ORA/DBSIZE.XML.

3)

FCO-00011  The step importRow_Tsp with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|importRow_Tsp was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: C:\Documents and Settings\Administrator\Desktop\SAP\EXPORT\51037623_1/DB/ORA/DBSIZE.XML.).

Thanks in advance.

We encountered an error during upgrading our ECC

system from ECC 6.0 to ECC 6.0 EHP4.It states that DIMP_SDUD should be activated so that I can proceed to next step.But upon checking in sfw5 tcode we found that DIMP_SDUD is already activated.Also we checked for repaired objects for DIMP_SDUD in se03 but didn't find anything.I tried to reactivate DIMP_SDUD in swf5 but the job completed successfully in 0 secs (which is strange).Also I found that DIMP_SDUD is there in inactive object list in tcode se80.Let me know if there is any other solution for this.

Regards,

Pratik

Dear All,

We are upgading our SAP ERP 6.0  to EHP5. O/S AIX 5.3 and MAXDB 7.8 dabase.

We are getting following error during upgrade.

Severe error(s) occured in phase PREP_IMPORT/MVNTAB_TOOL!

Last error code set: Calling '/usr/sap/QA3/DVEBMGS00/exe/tp' failed with return code 8,

check /usr/sap/QA3/SUM/SUM/abap/log/TP.ECO for details<br/> Error during &quot;tp mvntabs&quot;-call - check 'TP.ECO'

and log file TP.ECO show:

#--------------------------------------------------------------

#---- MASKING file TP.ECO from /usr/sap/QA3/SUM/SUM/abap/log

#---- TIME: 20121102103426  PHASE: MVNTAB_TOOL

#--------------------------------------------------------------

SAPup> Starting subprocess with PID 340264 at 20121102103242

        ENV: DIR_LIBRARY=/usr/sap/QA3/DVEBMGS00/exe

        ENV: JAVA_HOME=/usr/java14/jre

        ENV: LIBPATH=/usr/sap/QA3/DVEBMGS00/exe:/usr/sap/QA3/SUM/SUM/jvm/jre/lib/ppc64/server:/usr/

sap/QA3/SUM/SUM/jvm/jre/lib/ppc64:/usr/sap/QA3/SUM/SUM/jvm/jre/../lib/ppc64:/usr/sap/QA3/SUM/SUM/jv

m/jre/lib/ppc64/jli:/usr/sap/QA3/SUM/SUM/jvm/jre/../lib/ppc64/jli:/usr/lib:/lib:/usr/sap/QA3/SYS/ex

e/run:/sapdb/programs/lib/lib64

        ENV: PATH=/usr/sap/QA3/DVEBMGS00/exe:/sapdb/programs/bin:/usr/java14/jre/bin:/home/qa3adm:/

usr/sap/QA3/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/qa3adm/bin:/usr/bin/X11:/sbin:.

        ENV: SAPSYSTEMNAME=QA3

        ENV: auth_shadow_upgrade=0

        ENV: dbms_type=ADA

        ENV: dbs_ada_schema=SAPQA3

EXECUTING /usr/sap/QA3/DVEBMGS00/exe/tp (tp)  pf=/usr/sap/QA3/SUM/SUM/abap/var/MVNTTOOL.TPP mvntabs

QA3

This is tp version 380.03.41 (release 720, unicode enabled)

Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 14).

Warning: unknown parameter DYNAMIC_PARAMETERS in parameter file (line 14).

tp finished with return code: 8

meaning:

  A tool used by tp produced errors

SAPup> Process with PID 340264 terminated with status 8 at 20121102103258

Thanks and Regards,

Orlando Perez

Hi, all, I'm upgrading insurance module at SAP ERP with SUM tool.

At execution step I got this error:

Severe error(s) occurred in phase MAIN_TRANSEXEC/MVNTAB_TRANS!

Last error code set: Calling 'C:\usr\sap\CM1\DVEBMGS04\exe/tp' failed with return code 8, check C:\SUM\SUM\abap\log\TP.ECO for details<br/> Error during &quot;tp mvntabs&quot;-call - check 'TP.ECO'    

TP.ECO log:

SAPup> Starting subprocess in phase 'MVNTAB_TRANS' at 20140601193822

    ENV: DBMS_TYPE=hdb

    ENV: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC

    ENV: PATH=C:\usr\sap\CM1\DVEBMGS04\exe;C:\Program Files\Far Manager\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\usr\sap\CM1\SYS\exe\uc\NTAMD64;C:\usr\sap\CM1\hdbclient

    ENV: SAPSYSTEMNAME=CM1

    ENV: dbs_hdb_schema=SAPCM1

    ENV: rsdb_ssfs_connect=0

EXECUTING C:\usr\sap\CM1\DVEBMGS04\exe\tp.EXE "pf=C:\SUM\SUM\abap\var\PMVNTUPG.TPP" "-Dbuffreset=no" ddlntabs "ddlmode=V" CM1

This is C:\usr\sap\CM1\DVEBMGS04\exe\tp.EXE version 380.18.68 (release 741, unicode enabled)

tp finished with return code: 8

meaning:

  A tool used by tp produced errors

SAPup> Process with PID 15316 terminated with status 8 at 20140601193848!

r3trans, tp and kernel are up to date.

Thanks and Regards.

Hi All,

I would like to install SAP ERP 6.0 EHP 7 IDES installations and Upgrade in MaxDB. I have no idea about the steps to follow.

1.How much Disk space we need

2. Media list

3. Installations and Upgrade process Doc.

Please suggest me and provide any docs related to them. Appreciate your Help.

Thanks

Nag.

Hi Guys,

While performing support pack stack upgrade using SUM  tool unexpectedly died with fatal error : RFC error system .

SUBST_CHECK_BATCHJOB' failed with code 3 key TYPELOAD_NEW_VERSION: A newer version of data type DD08V was found than the one required .

As shown below screenshot , Kindly advice how to fix this  issue

After the upgrade to EhP7, job EU_INIT ran for more than 4 days, increasing WBCROSSGT to 24 GB. Anyone else with this strange system behaviour? We're running on MaxDB 7.9.08.22.

Hello,

We are patching ECC6 EHP4 from SPS10 to SPS15.

We are running into a blocking issue in the Phase CHECK_INACT_OBJECTS.

A list of objects are displayed ,those objects can either be activated

or even open.

I had a look at sap note 1882203 - SPAM : CHECK_INACT_OBJECTS error

Inactive Objects.There are no such objects inSe80 displayed as inactive

We have actually two kind of problem

1/ Function Modules in-existent but inactive :

FUNC J_1BNFE_INVOICE_CREATE_SC
FUNC J_1BNFE_RETURN_OF_COMPONENTS
FUNC J_1BNFE_SEARCH_PO_BY_COMP
FUNC J_1BNFE_SEARCH_PO_BY_MAIN_ITEM
FUNC J_1BNFE_SUBSEQUENT_ADJUSTMENT

The function modules do not exist in se37 nor in se80.

At some point of time , we have applied a SAP NFe Brazil note which delivered those objects, but it created such a mess, that we have unimplemented the note , but the shadows of the FM s are still here.

We have tried to re-implement the note, but it did not work, as the system thinks that the objects are already here

2/ Class CL_EX_BADI_J_1BLEGALREPORT can not be activated

There is an inactive version of object CL_EX_BADI_J_1BLEGALREPORT

Message no. EU821

The class has one unique version

I tried to find out which SAP table is holding informations about incorrect inactive status in table REPOSRC, but in vain ...

Obviously, I have opened a sap customer call, but in the meantime our all SP schedule is on hold ...

Any idea would be highly appreciated

Thanks